| Author |
Message
|
| shaunmichaeljohnson |
 Posted: Tue Oct 17, 2006 8:00 am Post subject: "WEED EATER V8" |
 |
|
Joined: 21 Sep 2006
Posts: 38
Location: tasmania, Australia
|
well my new project is underway in the planning stages after
"weed eater 1" has to be modded too much to get it to run good enough.
it ran how it looks, weird 
"WEED EATER V8" is in planning stages, here are the stats:
dimentions: 36" long (900mm)
28" wide @ rear (711mm)
5" wide @ front (127mm) (it's triangular in shape)
4" deep (101mm)
specs: it's a flat bum airboat with a 54* slope on the side to aid turning.
the same 27cc spinning a 14x7 3 blade prop that is on "weed eater 1"
built using 1/16" ply (2mm) and some .5" ply (12mm) for the engine mounting plate.
here are the plans, there are a few chanes to be made
and the bulkheads
shaun
_________________
anything will fly if you put enough power on it! |
|
| Back to top |
|
 |
| saleens7 |
| Posted: Wed Nov 15, 2006 1:11 am Post subject: |
|
|
Joined: 22 Sep 2006
Posts: 76
Location: pembroke pines, FL
|
sooo???
any progress????
_________________
the right thing to say after every question that does not include sex, and your boss...
WHY? |
|
| Back to top |
|
|
| shaunmichaeljohnson |
| Posted: Wed Nov 22, 2006 7:59 am Post subject: |
|
|
Joined: 21 Sep 2006
Posts: 38
Location: tasmania, Australia
|
nope, i am still trying to refine "WEED EATER 1"
teh design above will not be used after all because it win't fit in the car.
but feel free to use it anyone wanting to build an airboat.
shaun
_________________
anything will fly if you put enough power on it! |
|
| Back to top |
|
|
|
|
